Instructions for Application: Wheels/RIMS

 1.  Prepare your wheels by using our IPA Solution with our surface prep MicroFiber towel to clean and degrease the surface of any existing protection or residual films. For heavily contaminated wheels, we recommend a thorough cleaning with a wheel cleaner in addition to Clay/Decontaminate by using both our clay bar and Iron Decontamination “Clay Cleaning Spray” together. This Clay/Decontamination step may be necessary to initially remove stubborn contamination from the barrels and/or wheel faces.

2.  Open the coating bottle and begin by dispensing numerous drops of the liquid onto the supplied Micro Silk applicator to sufficiently wet it. Work the product into the surface, ensuring full coverage over the desired area, using cross hatching motions and overlapping your previous pass by 25-50%. During your time between passes, utilize our UV Flashlight for inspections. Take note of behind the spokes, in between the crevices of the wheel design, around the valve stem and center cap areas. To ensure a thorough application, the light should shine and reveal an even and consistent bluish hue of light. If you notice streaking in the surfaces, level out with additional product and the used Micro Silk applicator.